Reloading Tools
-
LEE QUICK TRIM DIE BODY .30-30 WINCHESTER
Learn MoreFEATURES
-Quick trim die for .30-30 Winchester$15.47MSRP: $16.00
You save: $0.53 (3%)
-
LEE ULTIMATE 4-DIE RIFLE SET .30-30 WINCHESTER
Learn MoreFEATURES
-Ultimate 4-die set for .30-30 Winchester
-Full length resizing die
-Collet necksizing die
-Easy adjust dead length bullet seating die
-Factory Crimp Die
-Shell holder
-Powder measure
-Load data$65.24MSRP: $74.00
You save: $8.76 (12%)
-
LEE COLLET 2-DIE SET .30-30 WINCHESTER
Learn MoreFEATURES
-.30/30 Winchester
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data$40.28MSRP: $49.98
You save: $9.70 (19%)
-
LEE FACTORY CRIMP DIE ONLY .30-30 WINCHESTER
Learn MoreFEATURES
-Factory crimp die for .30-30 Winchester
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation$15.45MSRP: $15.98
You save: $0.53 (3%)
-
LEE RGB 2-DIE SET .30-30 WINCHESTER
Learn MoreFEATURES
-For .30-30 Winchester
-Full length sizer die
-Easy adjust dead length bullet seating die (no crimp)$27.11MSRP: $30.98
You save: $3.87 (12%)
-
HORNADY .30-30 2-DIE RIFLE SET SERIES I
Learn MoreFEATURES
-.30-30 Win.
-Size Die & Bullet Seater Die
-Articulated details offer more precise reloading, by offering easier adjustments, better alignment &
smoother functioning
-Fine internal finish provides a lifetime of reloading$56.65 -
RCBS FL DIE SET .30-30 WIN. GP-A
Learn MoreFEATURES
-Caliber: .30-30 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated$56.79 -
$52.24
MSRP: $54.00
You save: $1.76 (3%)
-
LEE FULL LENGTH 2-DIE SET .350 REMINGTON MAGNUM
Learn MoreFEATURES
-Full length 2 die set for .350 Remington Magnum
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data