Reloading Tools

FEATURES
-Quick trim die for .30-30 Winchester

FEATURES
-Ultimate 4-die set for .30-30 Winchester
-Full length resizing die
-Collet necksizing die
-Easy adjust dead length bullet seating die
-Factory Crimp Die
-Shell holder
-Powder measure
-Load data

FEATURES
-.30/30 Winchester
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data

FEATURES
-Factory crimp die for .30-30 Winchester
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

FEATURES
-For .30-30 Winchester
-Full length sizer die
-Easy adjust dead length bullet seating die (no crimp)

FEATURES
-.30-30 Win.
-Size Die & Bullet Seater Die
-Articulated details offer more precise reloading, by offering easier adjustments, better alignment &
smoother functioning
-Fine internal finish provides a lifetime of reloading

FEATURES
-Caliber: .30-30 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated