Reloading Tools

FEATURES:
-For bottleneck cases used in tight-chambering semi-automatic, pump or lever-action rifles.
-The set consists of a Small Base Sizer Die w/ an Expander-Decapping Unit and REgular Seater Die w/ Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also de-primes the case
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets w/out crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth
-.243 Remington

FEATURES
-Caliber: 6.5mm Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: 5.7X28MM
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-Intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die w/ an Expander-Decapping
Unit, & a Seater Die w/ Bullet Seater Plug
-Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated
-.25-20 Winchester

FEATURES
-Caliber: .25-06
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-.25-06
-For bottleneck cases to be fired in bolt-action rifles only
-Includes a Neck Sizer Die with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug
-Neck Sizer Die resizes the neck only (it doesn't touch the shoulder or body) & deprimes
-Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated

FEATURES
- Caliber: .25-35 Winchester
- This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die with
an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
- The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
- It sizes the outside of the case, de-primes & expands the neck to accept the bullet
- The die has vents to prevent case damage caused by trapped air & for excessive lubricant
- Headspace is held to minimum tolerances to avoid changing the case body length during full length
sizing.
- The included Seater Die has a built-in roller crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .250 Savage
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .25 Winchester Super Short Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated