Reloading Tools

FEATURES
-Caliber: .221 Fireball
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .222 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .223 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.223 Remington

FEATURES:
-.223 Rem.
-Forbottleneck type cases used in tight-chambering semi-automatic, pump or lever-action rifles
-Consists of a Small Base Sizer with an Expander-Decapping Unit & Regular Seater Die with Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also deprimes the case
-The Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth

FEATURES
- Caliber: .223 Remington/5.56mm
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

FEATURES:
-.223 Rem.
-Resizes the case neck only (it doesn't touch the shoulder or body) & deprimes

FEATURES
- Caliber: .223 Remington
- The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic,
pump or lever-action firearms.
- The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths.
- It also de-primes the case.
- Note: Not recommended for ammunition used in bolt-action rifles

FEATURES
-Caliber: .243 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated