Reloading Tools

FEATURES
-Caliber: .17 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .40 Smith & Wesson/10mm Auto
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .50AE/.50 Smith & Wesson
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & taper crimps

FEATURES
-Caliber: .357 Sig
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .500 Smith & Wesson Magnum
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .460 Smith & Wesson
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
- Caliber: .26 Nosler
- This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die with
an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
- The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
- It sizes the outside of the case, de-primes & expands the neck to accept the bullet
- The die has vents to prevent case damage caused by trapped air & for excessive lubricant
- Headspace is held to minimum tolerances to avoid changing the case body length during full length
sizing.
- The included Seater Die has a built-in roller crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: 7mm Shooting Times Western
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
- Caliber: .28 Nosler
- This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die with
an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
- The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
- It sizes the outside of the case, de-primes & expands the neck to accept the bullet
- The die has vents to prevent case damage caused by trapped air & for excessive lubricant
- Headspace is held to minimum tolerances to avoid changing the case body length during full length
sizing.
- The included Seater Die has a built-in roller crimper to secure the bullet at the same time as it's seated