Reloading Tools

FEATURES
-Caliber: .17 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .300 Remington Ultra Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: 7mm Remington Ultra Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-For straight-wall cartridges
-Sizer Die sizes the case & de-primes (Note: Cases must be lubricated)
-The expander die expands the case to the proper diameter to accept the bullet, & it imparts case mouth
flare/bell for bullet feeding
-The seater die seats the bullet & roll crimps
-.32-20 Winchester

FEATURES
-Caliber: .357 Magnum/.38 Special/.357 Max
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .357 Magnum/.38 Special/.357 Max
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .41 Magnum
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .44 Magnum/.44 Special
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

FEATURES
-Caliber: .44-40 Winchester
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps