Shop discount firearm optics at the best prices online only at Get Your Guns America

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage 42
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Aluminum
-Matte black
-Fits: Savage B.Mag.
-Length: 5.882"
-Center spread: 3.195"
-Height: .4"
-Mounting hardware included

FEATURES:
-Aluminum
-Matte black
-Fits: Savage A17
-Length: 5.882"
-Center spread: 3.181"
-Height: .4"
-Mounting hardware included

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Short Action
-0 MOA
-Center Spread: 3.259"*
-Overall Length: 6.276"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Short Action
-20 MOA
-Center Spread: 3.259"*
-Overall Length: 6.276"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Long Action (Pre '64)
-0 MOA
-Center Spread: 3.805"*
-Overall Length: 7.064"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 WSM
-0 MOA
-Center Spread: 3.514"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 52
-Also fits Kimber 82C, 82G, H&R 12, Winchester 75, Anschutz 64, & Remington 37
-0 MOA
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 52
-Also fits Kimber 82C, 82G, H&R 12, Winchester 75, Anschutz 64, & Remington 37
-20 MOA
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite