Shop discount firearm optics at the best prices online only at Get Your Guns America

FEATURES:
-Aluminum
-Matte black
-Fits:long action Remington 783
-Length: 7.064"
-Center spread: 3.54"
-Height: .4"
-Mounting hardware included

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-0 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-20 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For long action round back Savage rifles
-20 MOA
-Center Spread: 4.630"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-This mount does not fit the 212

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Savage Flat Back Long Action
-Machined From: Solid 7075 T6 Aircraft Grade Aluminum
-Finish: Matte Black
-Mounting Hardware: Socket Head Torx® Screws & Wrench provided
-Center Spread: 3.805"
-Overall Length of Mount: 7.064"

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Mark II & 93 rifles
-0 MOA
-Center Spread: 3.345"*
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Mark II & 93 rifles
-20 MOA
-Center Spread: 3.345"*
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.8" Mount
-Fits Savage 93

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Axis/Axis II (formerly the Savage Edge) rifle
-0 MOA
-Center Spread: 4.321"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver