Reloading Tools
-
LEE CARBIDE SIZER DIE ONLY .45ACP/.45WM/.45 AUTO-RIM
Learn MoreFEATURES
-For .45 ACP, .45 Auto Rim, .45 Schofield, .45 Winchester Magnum
-Carbide full length sizing die only
-No case lube needed$27.84MSRP: $29.98
You save: $2.14 (7%)
-
LEE CARBIDE FACTORY CRIMP DIE .45ACP/.45WM/.45AR
Learn MoreFEATURES
-For .45 ACP, .45 Auton Rim, .45 Winchester Magnum, .45 Gap
-Sizes the cartridge while being crimped
-Every round will positively chamber freely
-Applies a roll crimp
-Adjusting screw quickly & easily sets desired amount of crimp$27.56MSRP: $28.98
You save: $1.42 (5%)
-
HORNADY .45ACP BULLET FEEDER DIE
Learn MoreFEATURES
-.45 ACP
-Case activated
-Solid steel collets
-Designed for the Hornady Lock-N-Load AP reloading press
-Can also be used with any other press with 7/8"-14 die threads$47.85 -
RCBS CARBIDE TAPER CRIMP DIE SET .45ACP/.45 AUTO RIM GP-B
Learn MoreFEATURES
-Caliber: .45ACP
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps$88.33MSRP: $90.45
You save: $2.12 (2%)
-
LEE FULL LENGTH 2-DIE SET .35 WHELEN
Learn MoreFEATURES
-Full length 2 die set for .35 Whelen
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data$45.45MSRP: $46.98
You save: $1.53 (3%)
-
RCBS FL DIE SET .35 WHELEN GP-A
Learn MoreFEATURES
-Caliber: .35 Whelen
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated$56.79 -
RCBS CARBIDE SIZER DIE ONLY .45ACP/.45 AUTO RIM
Learn MoreFEATURES:
-Sizes the case & de-primes.
-The carbide sizer ring eliminates the need to lubricate cases
-.45 ACP/.45 Auto Rim -
LEE FULL LENGTH 2-DIE SET .325WSM
Learn MoreFEATURES
-Full length 2 die set for .325 Winchester Short Magnum
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data