Reloading Tools
-
LEE FULL LENGTH 3-DIE SET 6.5X55 SWEDISH MAUSER
Learn MoreFEATURES
-Pacesetter 3 die set for 6.5x55 Swedish Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data$45.45MSRP: $46.98
You save: $1.53 (3%)
-
LEE RGB 2-DIE SET 6.5X55 SWEDISH MAUSER
Learn MoreFEATURES
-For 6.5x55 Swedish Mauser
-Full length sizer die
-Easy adjust dead length bullet seating die (no crimp)$29.96MSRP: $30.98
You save: $1.02 (3%)
-
$17.81
MSRP: $20.00
You save: $2.19 (11%)
-
RCBS FL DIE SET .26 NOSLER
Learn MoreFEATURES
- Caliber: .26 Nosler
- This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die with
an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
- The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
- It sizes the outside of the case, de-primes & expands the neck to accept the bullet
- The die has vents to prevent case damage caused by trapped air & for excessive lubricant
- Headspace is held to minimum tolerances to avoid changing the case body length during full length
sizing.
- The included Seater Die has a built-in roller crimper to secure the bullet at the same time as it's seated$97.03 -
LEE QUICK TRIM DIE BODY 6.5X55 SWEDISH MAUSER
Learn MoreFEATURES
-Quick trim die for 6.5x55 Swedish Mauser -
LEE COLLET 2-DIE SET 6.5X55 SWEDISH MAUSER
Learn MoreFEATURES
-6.5x55 Mauser
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data -
RCBS FL DIE SET 6.5X55MM SWEDISH MAUSER GP-A
Learn MoreFEATURES
-Caliber: 6.5mmx55 Swedish Mauser
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated -
-