Reloading Tools
-
LEE FULL LENGTH 3-DIE SET .25-06 REMINGTON
Learn MoreFEATURES
-Pacesetter 3 die set for .25-06 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data$45.45MSRP: $46.98
You save: $1.53 (3%)
-
LEE COLLET 2-DIE SET .25-06 REMINGTON
Learn MoreFEATURES
-For .25-06 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data$48.34MSRP: $49.98
You save: $1.64 (3%)
-
LEE FACTORY CRIMP DIE ONLY .25-06 REMINGTON
Learn MoreFEATURES
-Factory crimp die for .25-06 Remington
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation$15.45MSRP: $15.98
You save: $0.53 (3%)
-
RCBS FL DIE SET .25-06 REM GP-A
Learn MoreFEATURES
-Caliber: .25-06
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated$56.79 -
RCBS NECK SIZER DIE SET .25-06 REMINGTON
Learn MoreFEATURES:
-.25-06
-For bottleneck cases to be fired in bolt-action rifles only
-Includes a Neck Sizer Die with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug
-Neck Sizer Die resizes the neck only (it doesn't touch the shoulder or body) & deprimes
-Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated$55.78MSRP: $56.45
You save: $0.67 (1%)
-
LEE QUICK TRIM DIE BODY .25-06 REMINGTON
Learn MoreFEATURES
-Quick trim die for .25-06 Remington -
LEE COLLET SIZING DIE ONLY .25-06 REMINGTON
Learn MoreFEATURES
-.25-06 Remington
-Collet die only
-Sizes just the neck
-Needs no lubrication