Tools

FEATURES:
-Firing pin large diameter scraper
-Bolt tail exterior scraper
-Behind-cartridge extractor scraper
-Firing pin small diameter scraper
-Bolt tail shoulder scraper
-Cotter pin puller
-Bolt cam pin scraper
-Bolt waist scraper
-1/4" bit driver
-Bolt carrier scraper (2)
-Between bolt lugs scraper
-Bolt tail interior scraper
-Bolt face scraper

FEATURES
-420 SS claw-point blade
-Pin punch
-Choke wrench: 10 ga; 12 ga; 16ga; 20 ga; 28 ga; .410
-Scope windage/elevation blade
-Torx drive: T20; T15; T10
-Allen Hex drive: 3/32"; 5/32"
-Magnetic 3/16" driver
-Screwdrivers: 1/8" flat; 3/16" flat; Philips 1 & 2
-Magnetic bit storage block with access door
-420 stainless steel frame with rubber grip-coated polymer jackets

FEATURES:
-All stainless steel construction
-Key ring w/ strap
-Pin punch
-Bolt tail scraper
-Firing pin scrapers
-Wrenches: 3/8", 5/16", 1/4", 3/16", 1/8"
-5mm bit driver
-Flat head screwdriver
-Front sight adjuster
-Rotating "turret"
-Bolt face scraper/screwdriver
-Bottle opener
-Cutter
-1" Ruler
-Carabiner

FEATURES:
-Titanium coated stainless steel components
-Non-hardened stainless steel pick/scraper
-3" 420 stainless steel Tanto Knife
-1911 Government & Officer Bushing Wrench
-2.5" Long Bit Driver
-6 Hex Bits w/ ball detents
-4 Bondhus Protanium® Hex Keys for laser sights
-3/32" Pin Punch w/ 8-32 threads
-Fine-Tooth Metal File
-Tap Hammer Surface

FEATURES:
-Embedded magnet holds small pins securely
-Universal holes sizes accommodate most pin removals
-Non-slip outer ring steadies block during use
-Central groove steadies barrels
-Work surface made of ultra-tough engineering resin
-1911 government model barrel bushing wrench on back side

FEATURES
-16 oz.
-Precision manufactured
-Hand assembled within the USA
-Brass head is hand turned from CDA 360 brass rod, extruded in a USA mill & beautifully hand polished
-Hickory handle is pressed into the finished brass head & securely brass pinned

FEATURES
-4 oz.
-Precision manufactured
-Hand assembled within the USA
-Brass head is hand turned from CDA 360 brass rod, extruded in a USA mill & beautifully hand polished
-Hickory handle is pressed into the finished brass head & securely brass pinned

FEATURES
-8 oz.
-Precision manufactured
-Hand assembled within the USA
-Brass head is hand turned from CDA 360 brass rod, extruded in a USA mill & beautifully hand polished
-Hickory handle is pressed into the finished brass head & securely brass pinned

FEATURES
-8-Piece Brass Roll Spring Punch Set
-Manufactured from high quality CDA 360 hex brass rod
-Beautifully polished
-Machine turned & designed for critical work where non-marring & non-sparking are of importance
-Carefully made to properly fit roll spring pins
-Includes sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
-Packed in a quality tool toll
-100% Made in the USA