Reloading Tools

FEATURES:
-Caliber: .338 Winchester Magnum
-Allows the user to trim cases by hand or with a power attachment (included) to precise pre-set length
-The trimmer comes with a case locking device, cutter, trim-to-length pilot, cutter head & both hand & power
trimming adapters

Features:
-Can be used in conjunction with the Classic Powder Measure & the Auto Drum Powder Measure
-All drums are infinitely adjustable within range
-No tools are required for adjustment
-A graduated adjustment key is included with each drum
-Each turn of the adjusting screw is .1 cc or about 1 grain of powder
-Each key is marked with .01 cc graduations, allowing easy 1/10 grain powder adjustments

Includes 4 precision molded nylon drums:
(2) Small Drums for charging .25 ACP to .223 Remington
(2) Large Drums for charging the .223 Remington to Large Magnums
Also include an insert to allow reduced capacity charging similar to smaller drum

FEATURES
-For .300 Winchester Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

FEATURES:
-Caliber: .45 ACP
-Allows the user to trim cases by hand or with a power attachment (included) to precise pre-set length
-The trimmer comes with a case locking device, cutter, trim-to-length pilot, cutter head & both hand & power
trimming adapters

Features:
-1/10 grain accuracy
-Integrated clear plastic cover protects the scale during storage & transport
-Large hi-contrast backlit display
-Simple controls for easy changes of units or tare weights

Includes:
-Scale with clear cover
-Calibration weights
-Powder pan
-Carry bag

FEATURES
- Caliber: 6.5 Creedmoor
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

FEATURES
-Shell Holder #15
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

FEATURES
-Factory crimp die for .30-06 Springfield
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

FEATURES
-For .32 Winchester Special
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim