Reloading Tools
-
LEE LUBE & SIZING KIT .457
Learn MoreFEATURES
-For .457
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**$25.13MSRP: $25.98
You save: $0.85 (3%)
-
LEE PERFECT POWDER MEASURE WITH STAND
Learn MoreFEATURES
-Best for reloading rifle cases
-Can also be used for pistol cases
-Throws charges from 2 to over 100 grains
-Elastomer wiper prevents powder cutting
-Micrometer adjuster reads directly in cubic centimeters
-Includes a sturdy steel mounting bracket$28.60MSRP: $30.98
You save: $2.38 (8%)
-
LEE LUBE & SIZING KIT .451
Learn MoreFEATURES
-For .451
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**$25.13MSRP: $25.98
You save: $0.85 (3%)
-
LEE LUBE & SIZING KIT .430
Learn MoreFEATURES
-For .430
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**$25.13MSRP: $25.98
You save: $0.85 (3%)
-
LEE UNDERSIZE MANDREL .262" FOR COLLET SIZING DIES
Learn MoreFEATURES
-Undersize mandrel for 6.5x55, .260 Remington & 6.5 Creedmoor
-For a tighter fit than a factory collet die$4.84MSRP: $5.00
You save: $0.16 (3%)
-
LEE LOAD-ALL 12GA CONVERSION KIT
Learn MoreFEATURES
-Everything to convert the Load-All II to 12 gauge
-The entire die carrier is replaced, so no adjustments are needed
-Includes the die carrier, steel sizer, wad guide, shell holder, load data, & instructions$27.11MSRP: $30.98
You save: $3.87 (12%)
-
LEE LOAD-ALL 16GA CONVERSION KIT
Learn MoreFEATURES
-Everything to convert the Load-All II to 16 gauge
-The entire die carrier is replaced, so no adjustments are needed
-Includes the die carrier, steel sizer, wad guide, shell holder, load data, & instructions$28.12MSRP: $30.98
You save: $2.86 (9%)
-
LEE QUICK TRIM DIE BODY .45ACP
Learn MoreFEATURES
-Quick trim die for .45 ACP$15.47MSRP: $16.00
You save: $0.53 (3%)
-
LEE MOLD MALLET 10" HARDWOOD
Learn MoreFEATURES
-Ash hardwood construction
-Cut the sprue & release the bullets with one handy tool
-Ergonomic design makes it convenient & comfortable to use with long casting sessions
-Mallet is 10" long$9.67MSRP: $10.00
You save: $0.33 (3%)
-
LEE FACTORY CRIMP DIE .22TCM
Learn MoreFEATURES
-.22 TCM
-Crimps the bullet firmly in place for the bottleneck cartridge
-A firm crimp improves accuracy because pressure must build
to a higher level before the bullet begins to move$24.18MSRP: $25.00
You save: $0.82 (3%)