Reloading Tools

FEATURES
-80 watt ceramic heater
-Large 2-liter stainless steel tank holds up to 300 - .223 cases or 150 - .308 cases
-5 to 30 minutes timer allows you to choose the appropriate cycle for your application
-Tank dimensions: 7.25" x 6" x 3" (2.1 qt.)

FEATURES
-Factory crimp die for .17 Hornet
-7/8 x 14" thread
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

FEATURES
-Quick trim die for .30-06 Springfield

FEATURES
-.410 bore
-1/2 oz. charge bar
-Bushings: 10, 11, 12
-Works on six shells at once
-Fully automatic primer feed
-Auto-cycle charging
-Three-stage crimp
-"Power Ring" resizer
-Automatic indexing
-Finished-shell ejection
-Auto-Dex™ automatically moves the shells through each reloading stage by
simply returning the handle to the top of its stroke

FEATURES
-Excellent liquid precleaner for extremely fouled cases
-Also may be used as a wet media
-Use manually or with a 600 tumbler
-16 oz. bottle

FEATURES:
-Designed to fit Hornady® Custom Grade™ Dies, & are machined to fit the profile of the A-Tip bullets to seat
them as precisely as possible w/out damaging bullets
-Not compatible w/ other manufacturer's dies

FEATURES
-Caliber: .25-06
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Kit Includes:
-Lock-N-Load Classic Single-Stage Press
-Lock-N-Load Powder Measure
-Electronic Scale
-Powder Trickler
-Funnel
-The 9th Edition Hornady Handbook of Cartridge Reloading
-Three Lock-N-Load Die Bushings
-Primer Catcher
-Positive Priming System
-Hand-Held Priming Tool
-Universal Reloading Block
-Chamfering and Deburring Tool
-Primer Turning Plate
-One Shot Case Lube

FEATURES
-Trim & chamfer in a matter of seconds
-Hex shank snaps into cordless screwdriver or drill(not included)
-Includes power Quick Trim adapter, chip catcher & deluxe cutter assembly

*This tool also requires a cartridge specific pistol Quick Trim die or rifle Quick Trim die