Reloading Tools
-
LEE COLLET STYLE CRIMP DIE ONLY .30M1 CARBINE
Learn MoreFEATURES:
-Caliber: 30 Carbine
-Factory Crimp
-Threads: 7/8" - 14$15.45MSRP: $15.98
You save: $0.53 (3%)
-
LEE DIE BOX FLAT STYLE FOR 4-DIE SET
Learn MoreFEATURES
-Flat Die Box
-Made of durable red plastic
-Holds 4 dies$6.76MSRP: $6.98
You save: $0.22 (3%)
-
LEE FULL LENGTH 2-DIE SET 6.8 REM SPC
Learn MoreFEATURES
-Pacesetter 3 die set for 6.8 Remington Special
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data$41.83MSRP: $46.98
You save: $5.15 (11%)
-
LEE PRO AUTODISK POWDER MEASURE
Learn MoreFeatures:
-Hopper holds 1/2 pound of powder
-Elastomer wiper & Teflon coated metal casting
-Will not cut powder & almost totally eliminates leakage
-Large hopper with shut-off valve is attached with brass thumb nuts for convenience in disk changing
-Increased safety with pull-back lever
-Includes swivel adapter & spring return lever with spring & all 4 disksIncludes 4 disks to adjust your charges with:
Disk A = .30 to .43 cc
Disk B = .46 to .66 cc
Disk C = .71 to 1.02 cc
Disk D = 1.09 to 1.57 cc$58.03MSRP: $60.00
You save: $1.97 (3%)
-
LEE QUICK TRIM DIE BODY .17 REMINGTON
Learn MoreFEATURES
-Lee Quick Trim Die
-17 Remington
-This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth.
-No calipers, measurement or adjustment required.
-Simply install the appropriate quick trim die in your press and start trimming$18.21MSRP: $20.00
You save: $1.79 (9%)
-
LEE DOUBLE CAVITY MOLD .440 BALL W/HANDLES
Learn MoreFEATURES
-Double Cavity Mold
-Produces a .440 diameter ball
-127.87 grains
-Includes handles$42.02MSRP: $45.98
You save: $3.96 (9%)
-
LEE QUICK TRIM CASE TRIMMER DELUXE MODEL
Learn MoreFEATURES
-Quickly & precisely trims brass to the correct length at the same times it chamfers the inside & outside
of the case mouth
-No calipers, measurement or adjustment required
-Simply install the appropriate quick trim die in your press & start trimming
-A click adjustable stop allows trim length adjustment in .001 of an inch increments
-Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency
-Includes a snap on chip catcher$28.13MSRP: $30.00
You save: $1.87 (6%)
-
LEE DOUBLE CAVITY MOLD .445 BALL W/HANDLES
Learn MoreFEATURES
-Double Cavity Mold
-Produces a .445 diameter ball
-132.28 grains
-Includes handles$43.51MSRP: $45.98
You save: $2.47 (5%)
-
LEE QUICK TRIM DIE BODY .204 RUGER
Learn MoreFEATURES
-Quick trim die for .204 Ruger$15.47MSRP: $16.00
You save: $0.53 (3%)
-
LEE QUICK TRIM DIE BODY .300 WINCHESTER MAGNUM
Learn MoreFEATURES
-Quick trim die for .300Winchester Magnum$15.47MSRP: $16.00
You save: $0.53 (3%)