Firearm Reloading

FEATURES:
-Caliber: 6mm Creedmoor
-103 Grain
-ELD-X
-Ballistic Coefficient: .512
-100/box

FEATURES
-Caliber: 6.5MM .243
-108 grain
-Bullet type:ELD®Match™
-Ballistic coefficient: .536
-Heat Shield tip defies the effects of aerodynamic heating
-Retains its shape to provide a perfect meplat (tip) that is always the same shape
-Highest degree of bullet-to-bullet, lot-to-lotconsistency
-Measured with Doppler radar and corrected to standard atmospheric conditions
-100 rounds/box

FEATURES:
-Caliber/Type6MMBTHP Match™
-Diameter .243"
-Weight105 gr.
-Ballistic Coefficient .530
-Sectional Density .254
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES
-Caliber: .25 Cal. .257
-110grain
-Bullet type:FTX®
-Ballistic coefficient: .340
-Flex Tip® Bullet technology
-Upon impact, the soft tip compresses into the bullet, initiated immediate expansion
-InterLock® ring mechanically locks the core and jacket together for maximum weight retention
and deep penetration
-Heavy jacket over the shank of the bullet enhances accuracy
-100 rounds/box

FEATURES:
-Caliber/Type 25 Cal.BTSP
-Diameter .257"
-Weight117 gr.
-Ballistic Coefficient .391
-Sectional Density .253
-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES:
-Caliber/Type25 Cal.SST®
-Diameter .257"
-Weight117 gr.
-Ballistic Coefficient .390
-Sectional Density .253-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES
-Caliber: 6.5MM .264
-100 grain
-Bullet type:ELD®Match™
-Ballistic coefficient: .385
-Heat Shield tip defies the effects of aerodynamic heating
-Retains its shape to provide a perfect meplat (tip) that is always the same shape
-Highest degree of bullet-to-bullet, lot-to-lotconsistency
-Measured with Doppler radar and corrected to standard atmospheric conditions
-100 rounds/box

FEATURES:
-Caliber/Type6.5MMSST®
-Diameter .264"
-Weight123 gr.
-Ballistic Coefficient .510
-Sectional Density .252-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES
-Caliber: 6.5MM .264
-120 grain
-Bullet type:ELD®Match™
-Ballistic coefficient: .486
-Heat Shield tip defies the effects of aerodynamic heating
-Retains its shape to provide a perfect meplat (tip) that is always the same shape
-Highest degree of bullet-to-bullet, lot-to-lotconsistency
-Measured with Doppler radar and corrected to standard atmospheric conditions
-100 rounds/box