Shop discount scope mount and rings at the best prices online only at Get Your Guns America

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 52
-Also fits Kimber 82C, 82G, H&R 12, Winchester 75, Anschutz 64, & Remington 37
-20 MOA
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning A-Bolt Long Action
-0 MOA
-Center Spread: 3.86"*
-Overall Length: 7.064"
-Height: 0.4"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning A-Bolt Long Action
-20 MOA
-Center Spread: 3.86"*
-Overall Length: 7.064"
-Height: 0.4"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning AB3 Long Action
-0 MOA
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*Comes standard with a bevel on both sides, making it ambidextrous

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning BAR/BLR Long Action
-0 MOA
-Center Spread: 3.19"
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning Lever Action Short Action BLR
-0 MOA
-Center Spread: 2.8"
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Tikka T3 & Tikka T3 Lite rifles
-0 MOA
-Center Spread: 3.245"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES
-Made specifically for Tikka T3/Lite
-Picatinny-style base
-Silver Anodized finish
-Domestic 6061 T6 Extruded Aluminum
-Hex head screws & wrench provided
-Center spread: 3.245"
-Overall length: 7.458"

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Tikka T3 & Tikka T3 Lite rifles
-20 MOA
-Center Spread: 3.245"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver